Range Trailer –
Refrigerated
The Range Electric Powered Trailer System provides refrigerated fleets with the opportunity to reduce emissions from propulsion, as well as TRU operation. The system will make sure that goods stay fresh en route to their destination and save fuel while doing so.
Technical Specs
Components and Specifications
Components
Specifications
Standard Battery (Propulsion + eTRU)
288 kWh, 600V
Short Range Battery (Optional, Propulsion Only)
192 kWh, 600V
eAxle
250 kW peak,
200 kW cont. power
Trailer Performance
Full-Assist Fuel Savings
35% to 45%*
Full-Assist Range
Up to 300 miles*
eTRU Operation
Minimum of 80 kWh (~10 Hours)**
Mild Hybrid Fuel Savings
5% to 10%*
Mild-Hybrid Range
1,000+ miles
*Actual results may vary depending on drive cycle, payload, route, etc.
**80 kWh envelopes an example case that forecasts ~76 kWh needed for 10-hour operation in Food Service (2 – 38°F) with 46 kWh for pull down (bringing the trailer temperature down to the operating range). Customers are able to allocate more capacity for eTRU operation, this would come at the expense of fuel savings.
Charging Performance
Charging Type
AC Charging
DC Charging
Max Charge Rate
15 KW
22 kW
60 kW
170 kW
Time to Charge*
12.7 hours
8.6 hours
3.0 hours
1.2 hours
Power Supply Circuit
100A, 208/240VAC
30A, 480VAC 3-phase
100A, 480VAC 3-phase
200A, 480VAC 3-phase
Charging Type
AC Charging
Max Charge Rate
15 KW
Time to Charge
12.7 hours
Power Supply Circuit
100A, 208/240VAC
Charging Type
AC Charging
Max Charge Rate
22 kW
Time to Charge
8.6 hours
Power Supply Circuit
30A, 480VAC 3-phase
Charging Type
DC Charging
Max Charge Rate
60 kW
Time to Charge
3.0 hours
Power Supply Circuit
100A, 480VAC 3-phase
Charging Type
DC Charging
Max Charge Rate
170 kW
Time to Charge
1.2 hours
Power Supply Circuit
575A, 480VAC 3-phase
*Charging times quoted are from 20-80% state of charge, and calculated using proprietary models. Actual results may vary depending on numerous factors.
Compatibility
The Range trailer system will work on most 36’-53’ trailers, utilizing standard sliding axle rails, and can be towed by any 5th wheel equipped tractor.
Components of the trailer system will be mounted underneath the trailer, utilizing a hanging system that does not require drilling into the frame.
Distance between cross members: Maximum of 12 inches.
Compatible Floor Cross Member Spacing
• 10 or 12 inch centers, steel or aluminum
Components of the trailer will be mounted underneath the trailer, utilizing a hanging system that does not require drilling into the frame. However, 12 inches is the maximum allowable center distance between cross members.
Supported Accessory Details
The Range trailer system will integrate or allow for seamless operations of the vast majority of auxiliary systems or accessories (shore power connections, lift gates, etc.)
Electric Accessories
• TRU
• Shore power connections
• Rear & Side lift gates
• 120,240V split phase AC power (standard)
• 400,480V three phase AC power (optional)
• 12V DC auxiliary power
• Pallet jack charging
• Telematics
Any non-electric accessories may be added, and should not be impacted by the Range System, include but not limited to:
Non-Electric Accessories
• Side or rear doors (roll-up, sway, etc.)
• Aerodynamic edge skirts (i.e. Transtex)
• Ramps, steps, etc.
Warranty Details
Component
Standard Battery
eAxle
Warranty Details*
5 years, or 120,000 miles
2 years, or 200,000 miles
*The Range trailer system is not intended to impact the warranty of any conventional trailer components.
Check out the complete lineup of our products
We’re hiring
Change the World With Us
You’re joining an innovative team working hard to usher in the next generation of mobility.